Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Siemens Simcenter FloEFD 2021.2.1 v5446 (x64)
#1
[Bild: 00877bf1.jpg]
Siemens Simcenter FloEFD 2021.2.1 v5446 | 10.6 Gb

What's new in Simcenter FLOEFD 2021.2.1

Simcenter FLOEFD 2021.2.1 for NX / Simcenter3D Release Notes - Date: August 2021
FloEFD for NX is a powerful computational fluid dynamics (CFD) analysis tool that is embedded into Siemens NX. It enables design engineers to frontload CFD by moving simulation early into the design process where it is more cost effective to identify and fix problems.
With its unique combination of intuitive interface, and fast as well as accurate technology, Simcenter FLOEFD for NX can be inserted into your current design process without any disruption, streamlining your workflow and improving productivity by 40x. Use the power of Simcenter FLOEFD for NX with its direct interface to HEEDS Design Space Exploration software to select the most optimal choice.
When needed, Simcenter FLOEFD Flexx, enables you to access multiple CAD systems for simulation - useful for dealing with legacy data or using multiple CAD systems on the same project. With Simcenter FLOEFD for NX the power of CFD simulation is finally in your hands
New Features
The following new features are available in this release:
- 1D Elements. Increase simulation speed and reduce mesh requirements using 1D Elements within a 3D Simulation. Users can automatically convert a pipe into a chain of 1D Elements and solve their fluid and thermal interactions using 1D CFD embedded in Simcenter FLOEFD software for NX software, allowing the user to run simulations faster without compromising on accuracy. A dedicated 1D Elements GUI gives users the opportunity to define boundary conditions based upon geometry not present in the 3D Model providing accurate boundaries to a CFD simulation.
- New EV module. The new Simcenter FLOEFD EV module (MG287203FL) comprises various capabilities crucial for comprehensive multiphysics (thermal-electrical electromagnetics-structural) analysis of e-Powertrain and its components such as battery, inverters, DC Links, IGBTs, MOSFETs, Busbars, ECUs. The capabilities include ECTM and ECM battery module, Joule heating, Membrane, Electrical Element, Electromagnetics, Structural, SmartPCB, Two resistor, Network assembly, PCB and Heat pipe compact models.
- NX 1894. Support of NX 1984.

Simcenter FLOEFD 2021.2.1 for Simcenter3D Release Notes - Date: August 2021
FloEFD is a full-featured 3D computational fluid dynamics analysis solution built into major MCAD systems such as Creo, CATIA V5, Siemens NX, Solid Edge and SolidWorks. It tightly integrates with Inventor.
As an award-winning frontloading CFD solution, FloEFD enables users to move CFD simulation early into the design process where it can help engineers examine trends and dismiss less desirable design options. Fast to learn and easy to use, FloEFD eliminates the workflow complexity and meshing overheads of old-school CFD software.

Simcenter FLOEFD SC is a new Simcenter FLOEFD product available for Simcenter 3D users (starting from 2019.2-1880 version)
New Features
The following new features are available in this release:
- 1D Elements. Increase simulation speed and reduce mesh requirements using 1D Elements within a 3D Simulation. Users can automatically convert a pipe into a chain of 1D Elements and solve their fluid and thermal interactions using 1D CFD embedded in Simcenter FLOEFD SC software, allowing the user to run simulations faster without compromising on accuracy. A dedicated 1D Elements GUI gives users the opportunity to define boundary conditions based upon geometry not present in the 3D Model providing accurate boundaries to a CFD simulation.
- New EV module. The new Simcenter FLOEFD EV module (MG287203FL) comprises various capabilities crucial for comprehensive multiphysics (thermal-electrical electromagnetics-structural) analysis of e-Powertrain and its components such as battery, inverters, DC Links, IGBTs, MOSFETs, Busbars, ECUs. The capabilities include ECTM and ECM battery module, Joule heating, Membrane, Electrical Element, Electromagnetics, Structural, SmartPCB, Two resistor, Network assembly, PCB and Heat pipe compact models.

Simcenter FLOEFD 2021.2.1 for Solid Edge Release Notes - Date: August 2021
Simcenter FLOEFD software for Solid Edge delivers the industry's leading computational fluid dynamics (CFD) analysis tool for fluid flow and heat transfer. Fully embedded in Solid Edge, Simcenter FLOEFD has intelligent tech-nology at its core to help make CFD eas-ier, faster and more accurate. It also enables design engineers to frontload CFD, or move simulation early into the design process, allowing users to iden-tify and fix problems earlier, saving time and money and enhancing productivity by up to 40 times
New Features
The following new features are available in this release:
- 1D Elements. Increase simulation speed and reduce mesh requirements using 1D Elements within a 3D Simulation. Users can automatically convert a pipe into a chain of 1D Elements and solve their fluid and thermal interactions using 1D CFD embedded in Simcenter FLOEFD software for Solid Edge software, allowing the user to run simulations faster without compromising on accuracy. A dedicated 1D Elements GUI gives users the opportunity to define boundary conditions based upon geometry not present in the 3D Model providing accurate boundaries to a CFD simulation.
- New EV module. The new Simcenter FLOEFD EV module (MG287203FL) comprises various capabilities crucial for comprehensive multiphysics (thermal-electrical electromagnetics-structural) analysis of e-Powertrain and its components such as battery, inverters, DC Links, IGBTs, MOSFETs, Busbars, ECUs. The capabilities include ECTM and ECM battery module, Joule heating, Membrane, Electrical Element, Electromagnetics, Structural, SmartPCB, Two resistor, Network assembly, PCB and Heat pipe compact models.

Simcenter FLOEFD 2021.2.1 for PTC Creo Release Notes - Date: August 2021
FloEFD for Creo is a full-featured 3D fluid flow, heat transfer analysis package-totally integrated into PTC Creo (and Pro/ENGINEER). FloEFD is both fast to learn and fast to use because it doesn't come with the numerical complexity and meshing overheads of traditional high-end computational fluid dynamics (CFD). It is the only CFD analysis tool that is truly embedded into Creo Parametric.
Unlike other 3rd party CFD programs, FloEFD for Creo works directly with native Creo geometry - with no translation or copies - in order to keep pace with on-going design changes. FloEFD for Creo has the same "look and feel" so you can focus on solving your problem instead of learning a new environment.
By using the Creo geometry directly and solid model information such as features and parameters, you can simulate your designs in real-world conditions. Direct use of native geometry is an extremely powerful feature since it provides you with functionality that is not easily offered by other CFD programs. Because you're using the same exact geometry for CAD and analysis, you maintain one set of data across your product design process, and your analysis is always in tune with your design.
New Features
The following new features are available in this release:
- 1D Elements. Increase simulation speed and reduce mesh requirements using 1D Elements within a 3D Simulation. Users can automatically convert a pipe into a chain of 1D Elements and solve their fluid and thermal interactions using 1D CFD embedded in Simcenter FLOEFD™ software for Creo design software, allowing the user to run simulations faster without compromising on accuracy. A dedicated 1D Elements GUI gives users the opportunity to define boundary conditions based upon geometry not present in the 3D Model providing accurate boundaries to a CFD simulation.
- New EV module. The new Simcenter FLOEFD EV module (MG287203FL) comprises various capabilities crucial for comprehensive multiphysics (thermal-electrical electromagnetics-structural) analysis of e-Powertrain and its components such as battery, inverters, DC Links, IGBTs, MOSFETs, Busbars, ECUs. The capabilities include ECTM and ECM battery module, Joule heating, Membrane, Electrical Element, Electromagnetics, Structural, SmartPCB, Two resistor, Network assembly, PCB and Heat pipe compact models.

Simcenter FLOEFD 2021.2.1 for CATIA V5 Release Notes - Date: August 2021
Simcenter FLOEFD for Catia V5 puts the power of computational fluid dynamics (CFD) simulation in the hands of the design engineer. An award-winning software, Simcenter FLOEFD works directly inside your CAD software. Now you can explore the full potential of designs quickly: understand the influence of changes in the geometry or boundary conditions on the results effortlessly, conduct fast and frequent what-if analysis, and generate insightful reports.
Realize the full potential of ideas quickly and save time and money by only progressing the design concepts with the most promise to the validation phase and when you need to use multiple CAD platforms on the same project or for legacy data, you can use Simcenter FLOEFD Flexx - a flexible licensing scheme enabling you to simulate your design in the CAD system of your choice.
New Features
The following new features are available in this release:
- 1D Elements. Increase simulation speed and reduce mesh requirements using 1D Elements within a 3D Simulation. Users can automatically convert a pipe into a chain of 1D Elements and solve their fluid and thermal interactions using 1D CFD embedded in Simcenter FLOEFD software for CATIA software V5, allowing the user to run simulations faster without compromising on accuracy. A dedicated 1D Elements GUI gives users the opportunity to define boundary conditions based upon geometry not present in the 3D Model providing accurate boundaries to a CFD simulation.
- New EV module. The new Simcenter FLOEFD EV module (MG287203FL) comprises various capabilities crucial for comprehensive multiphysics (thermal-electrical electromagnetics-structural) analysis of e-Powertrain and its components such as battery, inverters, DC Links, IGBTs, MOSFETs, Busbars, ECUs. The capabilities include ECTM and ECM battery module, Joule heating, Membrane, Electrical Element, Electromagnetics, Structural, SmartPCB, Two resistor, Network assembly, PCB and Heat pipe compact models.

Simcenter FLOEFD 2021.2.1 Standalone Release Notes - Date: August 2021
Simcenter FLOEFD is part of the Simcenter portfolio of simulation and test solutions that enables companies optimize designs and deliver innovations faster and with greater confidence. Simcenter FLOEFD helps engineers simulate fluid flow and thermal problems quickly and accurately within their preferred CAD environment. Due to its unique technology, it can reduce the overall simulation time by up to 75%.
New Features
The following new features are available in this release:
- 1D Elements. Increase simulation speed and reduce mesh requirements using 1D Elements within a 3D Simulation. Users can automatically convert a pipe into a chain of 1D Elements and solve their fluid and thermal interactions using 1D CFD embedded in Simcenter FLOEFD software, allowing the user to run simulations faster without compromising on accuracy. A dedicated 1D Elements GUI gives users the opportunity to define boundary conditions based upon geometry not present in the 3D Model providing accurate boundaries to a CFD simulation.
- New EV module. The new Simcenter FLOEFD EV module (MG287203FL) comprises various capabilities crucial for comprehensive multiphysics (thermal-electrical electromagnetics-structural) analysis of e-Powertrain and its components such as battery, inverters, DC Links, IGBTs, MOSFETs, Busbars, ECUs. The capabilities include ECTM and ECM battery module, Joule heating, Membrane, Electrical Element, Electromagnetics, Structural, SmartPCB, Two resistor, Network assembly, PCB and Heat pipe compact models.

Product: Siemens Simcenter FloEFD
Version: 2021.2.1 v5446
Supported Architectures: x64
Languages Supported: multilanguage
System Requirements: PC
Size: 10.6 Gb

Link Download


Download Via Rapidgator
Zitat:https://rapidgator.net/folder/6287938/Si...v5446.html

Download Via UploadGig
Zitat:https://uploadgig.com/file/download/839b...part01.rar
https://uploadgig.com/file/download/126A...part02.rar
https://uploadgig.com/file/download/fD4E...part03.rar
https://uploadgig.com/file/download/B9F3...part04.rar
https://uploadgig.com/file/download/c00d...part05.rar
https://uploadgig.com/file/download/d226...part06.rar
https://uploadgig.com/file/download/0358...part07.rar
https://uploadgig.com/file/download/d22D...part08.rar
https://uploadgig.com/file/download/3387...part09.rar
https://uploadgig.com/file/download/911d...part10.rar
https://uploadgig.com/file/download/F1e7...part11.rar
https://uploadgig.com/file/download/61d6...part12.rar
https://uploadgig.com/file/download/7f8e...part13.rar
https://uploadgig.com/file/download/2540...part14.rar
https://uploadgig.com/file/download/DD62...part15.rar

Extract files with WinRar 5 or Latest !
Zitieren


Möglicherweise verwandte Themen…
Thema Verfasser Antworten Ansichten Letzter Beitrag
  Siemens Simcenter FloTHERM 2210 (x64) mitsumi 0 67 25.05.2023, 08:33
Letzter Beitrag: mitsumi
  Siemens Simcenter Flotherm XT 2304.0 (x64) mitsumi 0 136 19.05.2023, 15:44
Letzter Beitrag: mitsumi
  Siemens Simcenter STAR-CCM+ APT Series 2302 Win/Linux 64-bit adsns 0 111 07.03.2023, 06:14
Letzter Beitrag: adsns
  Siemens Simcenter STAR-CCM+ 2302 (18.02.008-R8 Double Precision) Win/Linux 64-bit adsns 0 77 07.03.2023, 06:13
Letzter Beitrag: adsns
  Siemens Simcenter STAR-CCM+ 2302 (18.02.008 Single Precision) Win/Linux 64-bit adsns 0 75 07.03.2023, 06:12
Letzter Beitrag: adsns
  Siemens Simcenter Star CCM+ 2302 (18.02.008) Tutorials & Verification Suite Win/Linux adsns 0 100 07.03.2023, 06:09
Letzter Beitrag: adsns

Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste
Expand chat