Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Siemens Simcenter FloEFD 2205.0002 v5970 for Siemens NXSimcenter 3D (x64)
#1

[Bild: 2ccabef76f2164ba2c71cc866ea1f37b.jpeg]

Siemens Simcenter FloEFD 2205.0002 v5970 for Siemens NX/Simcenter 3D (x64)
File Size: 1.2 GB


FloEFD for Siemens NX is a powerful computational fluid dynamics (CFD) analysis tool that is embedded into Siemens NX. It enables design engineers to frontload CFD by moving simulation early into the design process where it is more cost effective to identify and fix problems and enhance productivity by x2 to x40.

FloEFD is
Embedded in Siemens NX - one interface, one model
Intuitive and easy-to-use
Fast and has robust convergence criteria even for highly complex geometry
Accurate due to use of intelligent technology
It is also the only CFD software delivering local user interfaces in Japanese, Chinese, Korean, French, German and Russian.
Experience streamlined workflows, faster results, and increased productivity with FloEFD.
NX-embedded CFD Simulation
CAD-embedded simulation enables engineers to conduct analysis in the same user environment as design. Therefore, engineers can use the latest CAD geometry for analysis to conduct multiple design studies and evaluate how the modifications influence the performance of the design without the hassle of data translation.
Parametric Study and Design Comparison Functionality
The compare configuration and parametric study capability inside FloEFD enables engineers to understand the influence of changes in the geometry or boundary conditions on the results. Users can evaluate the design envelope by assessing results by numerical values, by graphs and by visual images and animations and thereby compare a wide range of project permutations.
Fast and Automated Meshing Technology with SmartCells™
FloEFD uses meshing technology which is recognized as the most efficient framework for simulating fluid flows, heat and mass transfer. In addition, the meshing process can be automated easily for even the most complex CAD geometries with the aid of SmartCells technology.
SmartCells are unique technology that combine robust Cartesian meshing with highly efficient analytical or semi-empirical solver models; thus providing high levels of simulation accuracy with fewer number of mesh cells than in traditional CFD. SmartCells typically reduce the manual time spent by traditional CFD tool users in meshing even complex geometries by an order of magnitude on average thus dramatically reducing a historical bottleneck to CFD user productivity.
LED and Lighting Thermal Simulation Capabilities
FloEFD's LED Module offers a unique range of capabilities required for various lighting applications
Its Monte Carlo radiation model is best suited for thermal radiation predictions in lighting applications where lenses or reflectors can cause hot spots in focal points from the light source (solar or man-made).
A new band-less Monte Carlo model for lighting and radiation allows users to dramatically decrease time required for defining wave-length dependent properties while increasing simulation accuracy of spectral characteristics.
Its new water film model enables simulation of surface condensation, evaporation, icing and de-icing exploration such as condensation on the inner surfaces of automobile headlights.
Combined thermal and photometric model for LEDs based on T3Ster measurements of actual off-the-shelf LEDs can yield correct power and temperature predictions and "hot lumen" output.
Definition of radiation spectrum and setting intensity of radiation can now be dependent on the angle. With that data defined, FloEFD now automatically applies the calculated radiant flux on top of the LED.
Easy ray visualization helps finding sources for radiation hot spots on other parts of the luminaire.
A water absorption model enables the simulation of absorption of water into the plastic housing of the luminaire and later release of it under the right environmental conditions.
Instinctive User Experience
FloEFD for NX features an easy-to-use GUI with considerable intelligent automation built-in as standard
Operate within NX graphical user environment
Powerful analysis wizard guides users through the problem set-up
Interface uses engineering terms instead of technical jargon therefore users can focus on solving flow problems as opposed to figuring out how to use the software
Real-time feedback about the solution progress such as convergence and monitor point values
Engineering outputs appear in both a timely and intuitive manner including reports in Microsoft® Excel and Word
What's New
official site does not provide any info about changes in this version.

Homepage:
Code:
https://www.mentor.com/products/mechanical/floefd

Download link

rapidgator.net:
Zitat:https://rapidgator.net/file/db0df8c7d42c...4.rar.html

uploadgig.com:
Zitat:https://uploadgig.com/file/download/907c...3D.x64.rar

nitroflare.com:
Zitat:https://nitroflare.com/view/857378CB47CA...3D.x64.rar

1dl.net:
Zitat:https://1dl.net/krh02y22uc8m/klspo.Sieme...3D.x64.rar
Zitieren


Möglicherweise verwandte Themen…
Thema Verfasser Antworten Ansichten Letzter Beitrag
  MP04 for Siemens Solid Edge 2024 (x64) mitsumi 0 10 26.03.2024, 09:57
Letzter Beitrag: mitsumi
  Siemens NX 2312 Build 5000 (NX 2312 Series) Multilingual mitsumi 0 23 25.03.2024, 07:42
Letzter Beitrag: mitsumi
  Siemens NX 2306 Build 8500 (NX 2306 Series) Multilingual mitsumi 0 24 25.03.2024, 07:41
Letzter Beitrag: mitsumi
  Siemens Simcenter FloTHERM 2210 (x64) mitsumi 0 67 25.05.2023, 08:33
Letzter Beitrag: mitsumi
  MP13 for Siemens Solid Edge 2022 (x64) mitsumi 0 60 25.05.2023, 08:24
Letzter Beitrag: mitsumi
  Siemens Simcenter Flotherm XT 2304.0 (x64) mitsumi 0 136 19.05.2023, 15:44
Letzter Beitrag: mitsumi

Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste
Expand chat