Kickoff your CNC Milling career

Kickoff your CNC Milling career - Druckversion

+- Forum Rockoldies (https://rockoldies.net/forum)
+-- Forum: Fotobearbeitung - Photoshop (https://rockoldies.net/forum/forumdisplay.php?fid=16)
+--- Forum: E-Learning, Tutorials (https://rockoldies.net/forum/forumdisplay.php?fid=18)
+--- Thema: Kickoff your CNC Milling career (/showthread.php?tid=55084)

Kickoff your CNC Milling career - Panter - 13.06.2022

[Bild: 46524246bd25cij5y.jpg]

Kickoff your CNC Milling career
Published 05/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English + srt | Duration: 35 lectures (9h 38m) | Size: 5.23 GB

CNC milling made easy for everyone

What you'll learn
Program parts on a CNC Milling Machine using the Fanuc control.
Operate a CNC Milling Machine
Write and Read G and M codes
Read and interpret technical drawing
Generate NC codes with Autodesk FeatureCam
Requirements
Basic understanding on how to use a PC.
Description
This course is designed to teach you how to write a CNC program for a 3 axis cnc milling machine.
Many students find it difficult learning how to program a cnc machine, and the reasons include but not exclusive to
* Lack of resources (cnc machine, stock etc.)
* Danger of being injured by the machine as a novice.
* Danger of destroying the machine as a novice.
* Lack of proper guidance.
This course seeks to address the reasons stated above, due to this the entire course uses a simulation environment instead of a real cnc machine, this way one will not need to worry about the problems stated above. The software used in this course is able to simulate the entire behavior of a real world cnc machine from setting of your work offsets, to homing, jogging, using of clamps and vice to hold your stock, arranging your tools in your tool magazine for the automatic tool changer and many more, by the time you done with this course you will be good at programming a cnc mill. This course also deals with the theoretical and practical aspects of cnc mills. Some concepts taught in this course include.
* Fanuc control
* Cartesian coordinates
* Relative and absolute coordinates
* Polar coordinates
*Canned cycle
* Peck drilling cycle
* Linear and circular interpolation
* Machining pockets
* Generating CNC codes of complex geometry with Autodesk Feature Cam.
* And many more
This course is filled with a lot of programming exercises to sharpen the skills you will learn, so what are you waiting for hop on by enrolling.
Who this course is for
Engineering Students
Beginner CNC Machinist
Hobbyist

Show Content

Download from RapidGator

Download from Rapidgator:

Show Content

Download from Keep2Share

Show Content